54
Connecting a PC
HDMI Connection
Use the PC terminals to connect a PC.
Signal names for 15-pin mini D-sub connector
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No. 5 is not used for inputting the signal.
15
14
13
12
9
11
10
8
7
6
5
4 3
2
1
Pin No. Signal name Pin No. Signal name Pin No. Signal name
R GND (Ground) Not connected
G GND (Ground) SDA
B GND (Ground) HD
Not connected +5V VD
CSYNC GND (Ground) SCL
Analogue Connection
NOTE
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 59 for a list of PC signals compatible with the TV.
PC
DVI/HDMI conversion cable
(commercially available)
Ø 3.5 mm stereo minijack cable
(commercially available)
PC
RGB/DVI conversion cable
(commercially available)
PC
HDMI cable (commercially available)
INPUT 2 or INPUT 3
INPUT 1*
RGB cable (commercially available)
Ø 3.5 mm stereo minijack cable
(commercially available)
PC
Ø 3.5 mm stereo minijack
cable (commercially available)
INPUT 7*
INPUT 7*
* When using the INPUT 1 terminal, you must select the proper item in the “PC audio select” menu depending on
the type of HDMI cable connected. (See page 55.)
* When using the INPUT 7 terminal, you must select “INPUT7(RGB)” in the “PC audio select” menu. (See page 55.)
52D77X.indb 5452D77X.indb 54 2/17/09 5:13:43 PM2/17/09 5:13:43 PM
To Next Page
Loading...
