NOTE
• Detach the cable clamps on the rear of the TV when using the optional mount bracket.
• To use this TV mounted on a wall, fi rst remove the cover at the 4 locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of the TV.
Hanging on the wall
AN-37AG2/AN-52AG4 wall mount bracket.
(See the bracket instructions for details.)
Vertical mounting Angular mounting
Handling and precautions with the wall-mounted TV
• You can mount the TV on the wall using the optional AN-37AG2/AN-52AG4 bracket.
• For details, refer to the instructions supplied with the optional bracket.
CAUTION
• This TV should be mounted on the wall only with the AN-37AG2/AN-52AG4 (SHARP) wall mount bracket. The use
of other wall mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualifi ed service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualifi ed service personnel about using an optional AN-37AG2/AN-52AG4 bracket to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
About setting the TV angle
0
/
5
/
1
0
/
1
5
/
2
0
°
0
/
5
/
1
0
/
1
5
/
2
0
°
AN-52AG4AN-37AG2
Appendix
70
52D77X.indb 7052D77X.indb 70 2/17/09 5:13:55 PM2/17/09 5:13:55 PM
To Next Page
Loading...
