EasyManua.ls Logo

Sharp AQUOS LC-32D77X

Sharp AQUOS LC-32D77X
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Display reports regarding failures and changes for
timer settings.
You can check the current version of the software on
the screen.
65
Appendix
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press
a
/
b
to select “Reset”, and then press
ENTER.
3
Press
c
/
d
to select “Yes”, and then press
ENTER.
“Now, TV will restart automatically. OK?” displays
on the screen.
5
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
c
/
d
to select “Yes”, and then press
ENTER.
“Now initialising...” displays on the screen and
blinks.
After the reset has completed, the power shuts
off and then comes back on. The screen will have
returned to its original settings.
6
Now initialising...
After factory presetting,
TV will restart automatically
Reset
Receiver report
If you have already set the password, enter it
here.
“Return to factory pre-settings” displays on the
screen.
4
Information
Identifi cation
Message list
When a new broadcast station is detected, the
message is updated in the “Message list” of the
“Information” menu.
Press
a
/
b
to select the desired language
listed on the screen, and then press ENTER.
Press
c
/
d
to select
HOME
” or “
STORE
”, and
then press
ENTER.
7
8
Digital Search
Major Analogue Channel settings are pre-set.
However if there are any channel(s) that you
cannot receive with the factory pre-sets, please
perform “Auto installation” in “Setup” section
(refer chapter “Watching TV” on manual).
Press ENTER.
Major Analogue Channel settings are pre-set.
However if there are any channel(s) that you
cannot receive with the factory pre-sets, please
perform “Auto installation” in “Setup” section.
(See page 20.)
9
The TV searches for, sort and stores all the
receivable TV stations according to their settings and
the connected antenna.
• To abort the initial auto installation in progress,
press RETURN.
NOTE
When the TV is in STORE mode, repeat steps 1 to 7 to
change to HOME mode.
52D77X.indb 6552D77X.indb 65 2/17/09 5:13:52 PM2/17/09 5:13:52 PM

Table of Contents

Related product manuals