Sharp AQUOS LC-50N6000U

10
STEP3.Establishanetworkconnection
1.Press the button on the remote control and then press
>
to enter the Settings menu
.
2.Select Network→NetworkConguration.
TV JACK
Modem CableLAN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN
Establishawirednetworkconnection
AutomaticallyobtainanIPaddress
1.Select Ethernet. The TV will automatically obtain an IP address and connect to the network.
NOTE:ThedefaultoptionofIPSettingModeisDHCP.
2.If the connection fails then "Disconnected" will display for the Ethernet status. Retry or select Manual to input the information again.
ManuallyentertheIPaddress
1.Select Manual.
2.Enter the IP Address, Subnet Mask, Default Gateway, Preferred DNS and Alternative DNS in the menu. Next, select Connect.