Sharp AQUOS LC-55N6000U - STEP 1. Attach the TV Stand or Wall Mount Bracket; Attach the TV Stand

6
STEP 1. Attach the TV Stand or Wall Mount Bracket
Attach the TV Stand
CAUTION:
• BesuretodisconnecttheA/CpowercordbeforeinstallingastandorWall-Mountbrackets.
• TheLEDdisplayisveryfragileandmustbeprotectedatalltimeswheninstallingthelegsthatformthestand.Besureto
protectthe TVscreenfromgettingscratchedordamagedbyanyhardobjects.Inaddition,DONOTexertpressureonthe
frontoftheTVatany timebecauseitcouldcrack.
Follow the illustrations and instructions below to complete the installation steps:
Screw
M4×25 (43")
M4×20 (50"/55")
BASE STAND
Screw
M4×25 (43")
M4×20 (50"/55")
BASE STAND
1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the TV or scratching to the screen.
2. Remove the 2 stands from the accessory bag and then insert the stands into the bottom slots of the TV.
3. Secure the base stand to the TV with the 4 screws in accessary tightly.