Example
Initial setup (Continue)
Digital setting
You can reconfigure DTV services settings
automatically or manually.
1. Press MENU and the MENU screen
displays.
2. Press / to select "Initial setup".
3. Press / to select "Digital setting", and
then press ENTER. If you have already set
the password, enter it here.
See "Child lock" to set password.
4. Press / to select the desired menu
item, and then press ENTER.
Auto search
Use this menu to add new services
automatically after auto installation has been
completed.
Press / to select "DTV" or
"DTV +ATV".
Manual search
Add new services within a specified frequency
band.
Press / to find the channel and then
press ENTER .
Signal information
Use this menu to check signal information
depends on receiving channel.
NOTE
This selection does not work when country
selected is Phillippines.
On-Screen Display Menu
EN 4-6
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ﻲﺑرﻋ | АҒЫЛШЫН | O'ZBEK TILIDA
>><<
To Next Page
Loading...
