Example
System options (Continue)
View option
Wide mode
This function changes the screen size.
Select "View option" on the menu to display the
Wide mode menu screen.
The Wide mode menu varies depending on the
input source.
4:3 mode (DTV and HDMI only)
The 4:3 mode allows you to select between
"Normal" and "Full".
Normal: Normal range keeping 4:3 or 16:9
aspect ratio.
Full: Wide image without side bars.
Auto wide (DTV only)
The “Auto wide” allows the TV to switch
automatically among the different picture size.
(Off, On)
NOTE
Use “Wide mode” if an image does not
switch to the appropriate picture size. When
the broadcast signal contains no aspect
ratio information, the function will not work
even if enabled.
Change audio
MPX
Allows you to change the audio when multiple
audio is available for the program you are
watching. (Auto, MONO)
NOTE
You can change Audio by pressing MPX on
the remote control unit.
See pages 3-5 to 3-6 for details of Audio
function.
Bilingual
Select from among 3 kinds of mode: DUAL I,
DUAL II and DUAL I + II.
On-Screen Display Menu
EN 4-29
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ﻲﺑرﻋ | АҒЫЛШЫН | O'ZBEK TILIDA
>><<
To Next Page
Loading...
