Sharp aquos PN-L603B - User Manual

4. Press POWER button in left bottom.
5. Turn on Computer power.
*You need to install “Touch panel setting tool”
and “SHARP Pen software” to computer.
6. Change and select input I/F of this computer.
You can select by touching “TOUCH MENU” button.
7. Touch input I/F of this computer.
PN-L703B/L603B
Brief Guide ver1.1
Connect with computer and turn on power
1. Connect with computer by USB cable.
2. Connect with computer by Video cable.
3. Turn on display main power.
①D-Sub input
②Display Port input
③HDMI input
④D-Sub input
⑤HDMI input
⑥HDMI input
① ② ③
④
⑤
⑥
POWER button / TOUCH MENU
Start up “White board”
1. Double click “Pen Software” icon on desktop. *twice quickly.
2. Then “White board” start up.
1
[Notice] You can connect from side.
cable
Via computer

Sharp aquos PN-L603B Specifications

General

Display Size	60 inches
Panel Technology	LCD
Contrast Ratio	4000:1
Viewing Angle (H/V)	176° / 176°
Touch Technology	Infrared
Aspect Ratio	16:9
Resolution	1920 x 1080 pixels
Touch Points	10 points
Input Terminals	HDMI, DisplayPort, VGA, USB
Output Terminals	Audio out
Control Terminals	RS-232C
Speakers	2 x 10W

Summary

Connect Computer and Power On

Connect via USB and Video Cables

Connect the display to the computer using USB and video cables for interaction.

Turn On Display and Computer Power

Power on the display and the connected computer to begin operation.

Select Input Interface

Choose the correct input signal interface for the computer connection on the display.

Press Power Button

Locate and press the power button on the display, typically found in the bottom left.

Start White Board Application

Launch Pen Software and White Board

Double-click the 'Pen Software' icon to launch the White board application.

Draw and Edit Characters on White Board

Draw Characters with Pen

Use the bundled pen to draw characters on the display's white board area.

Change Pen Size and Color

Adjust the pen's size and color through the menu icon for drawing customization.

Erase Characters

Remove drawn content using the bundled eraser or pen eraser function.

Clear Entire Sheet

Erase all content on the current sheet by double-clicking the eraser icon and confirming.

Manage White Board Sheets and Save Data

Add, Navigate, and Change Sheets

Add new sheets, move between them, and change the displayed content by dragging.

Show Sheet List

View a list of sheets as thumbnails by touching the 'Sheet list' icon.

Save White Board Data

Save your work by selecting the 'Save' icon, choosing a method, location, and confirming.

Manage Saved Data and Turn Off Display

Open Saved White Board Files

Open previously saved files by selecting the 'Open file' icon and choosing the file opening method.

Turn Off Power

Shut down the computer and then turn off the main power of the display.

Software Interface Overview

Square Menu Structure

Overview of the square menu icons and their functions for drawing and editing.

Tool Bar Structure

Explanation of the bottom tool bar icons and their respective functions.