Sharp AQUOS sense7 - Turning the Power On; Transferring data

- 5 -
Turning the Power On
A
f (hold down for at least 3 seconds) while the
product is turned off.
◎ When you turn the power on for the first time or perform factory
reset after purchasing the product, the initial setting screen is
displayed automatically. For details on the initial setting, refer to “取
扱説明書 詳細版 (Full Instruction Manual)” (Japanese).
Transferring data
If you connect an old smart phone and the product by connecting
included the Quick Switch Adapter (sample) to the external
connection jack of the product, you can easily transfer data.
Product
Quick Switch
Adapter (sample)
Cable used by
the old smart phone
Old smart phone
(Android device or iPhone)
•
In “Copy apps & data” of the initial settings displayed when turning on
the product for the first time or perform factory reset, follow the
instructions on the screen, connect smart phones together, and
transfer your data.
･ Connect to the wireless LAN (Wi-Fi
®
) or mobile network in advance.
･ For details on the data transfer by using Quick Switch Adapter (sample)
such as a transfer after the initial settings is complete, refer to the
following site.
(http://k-tai.sharp.co.jp/support/datacopy/pdf/easy_data_copy.
pdf) (Japanese)