• If no channel is found, confirm the type of connection
made with your TV and try "Easy Setup" again.
(See Daae 4-13.t
• To see the list of channels found during Channel search,
press INPUT, and then press _.
When "Set-top box" was selected in step 6.
• Click "OK" to display the confirmation screen for input
source switching.
Show the input list: You can check the current connection
status of external equipment. Confirm which input
terminal is connected to the set-top box.
OK: Clicking "OK" will complete the Easy Setup procedure.
• This may not display correctly depending on the
connected equipment.
• This is not displayed correctly when the connected
equipment is off.
• To watch TV using a set-top box, press INPUT after
completing the initia! settings, and select the input to
which the set-top box is connected.
• For changing the settings of the Initial Installation, perform
"Easy Setup" on the Setup menu on
Daue 4-13.
ENG 2-7
To Next Page
Loading...
