Example
Deletion of a Bluetooth Device
1 Press _L!'_"to select the device to delete, and then press
ENTER.
2 Press _L!V to select "Delete", and then press ENTER.
Selection of a Bluetooth Device
1 Press _T rto select the device to use, and then press
ENTER.
2 Press A/T' to select "Select", and then press ENTER.
• See also the instruction manual supplied with the
Bluetooth device.
• You can register up to 6 devices to the TV, but only one
keyboard and mouse can be used at a time.
• If a device for which "Selected" is displayed does not
operate properly, try searching and selecting the device
again.
• The keyboard or mouse may not operate properly
depending on the application being used.
• The Bluetooth device may not operate properly depending
on the device being used.
Other Devices Setting
• Though up to six devices (smartphones) can be
registered, only one can be used at a time.
• Repairing is required whenever you change the device
being used.
• To have TV power turn on automatically when a playback
signal is received from a paired device while TV power is
off, set "Quick Start Mode" to "ON".
Configures Connection Mode settings.
PUSH Button Mode:The push button method will be used
to establish connections.
PIN Code Mode:the PIN code method will be used to
establish connections.
Set preferred wireless channel for Miracast Connection
• Depending on the connected device, different channels
may be assigned.
• You can use the Wireless Channel setting to specify the
preferred channel. Select "Auto" to select the optimum
channel for the usage conditions.
ENG 4-25
To Next Page
Loading...
