Adjusts the depth manually. "0" is the level where no
adjustment is made.
• This function is only available when "3D Depth Control" is
"Manual".
You can adjust the 3D effect when converting images from
2D mode to 3D mode.
Select a desired level of convert effect from +1 to +16.
• This function is only available when converting 2D
images to 3D images.
• When you use this function, image conversion on the TV
will result in some differences in the original images and
how they appear.
• 2D images that have been converted to 3D images may
be viewed only for personal use.
This displays the elapsed time of 3D image viewing.
Yes: Displays the elapsed viewing time on the screen
every hour.
No: Does not display the elapsed viewing time.
This displays 3D images for testing the 3D operation.
Clicking "Start" on the screen plays back 3D test images.
• If you press RETURN during playback, the previous
screen will be displayed.
To enable this function, set "TV Location" to "Store".
On: Switch on signals to the 3D glasses. When watching
3D images, switch this setting to "On".
Off: Switch off signals to the 3D glasses. This will stop the
TV from influencing 3D glasses that may be in that area
of the store.
• Appropriate 3D Glasses are required to view 3D images.
Purchase 3D Glasses for use with Sharp brand 3D LCD
TVs.
ENG 5-12
To Next Page
Loading...
