Sharp AQUOS wish2 User Manual

- 2 -
H
f Power key
Use to turn the power on/off and
turn the screen on/off.
I
Fingerprint sensor
J
Earphone/Microphone jack
K
Sub microphone
*1
L
Mouthpiece (Microphone)
*1
M
External connection jack
Use when connecting Quick
Switch Adapter (sample), a
specified AC adapter (supports
USB Type-C
®
) (sold separately),
USB Type-C cable (commercially
available), etc. to the product.
N
Speaker
*1
O
Out camera lens
P
Mobile light
Q
Decoration of camera cover
Serves as an air vent
*1
for
maintaining performance.
R
& mark
S
5G antennas
*2
T
5G/GPS antennas
*2
U
Wi-Fi
®
/Bluetooth
®
antenna
*2
V
5G/4G/UMTS antennas
*2
*1 Covering the sections with stickers,
fingers, etc. may hinder product
performance.
*2 Antennas are built into the product.
Do not cover with hand during calls
or data communication. Doing so
may affect call/communication
quality.
◎ The outer case (back) of the product cannot be removed. Removing it
forcibly may cause damage or a fault.
◎ The battery is built into the product, and cannot be removed by the
customer. To force the power off if the screen freezes etc., hold down
f for at least 8 seconds.
Proximity sensor/Light sensor
◎ Placing stickers, etc. over the proximity sensor/light sensor may prevent
the product from operating properly.
Earphone/Microphone jack
◎ An earphone/microphone with the switch or depending on the type of
the earphone/microphone, it may not be available with the product.

Sharp AQUOS wish2 Specifications

General

Brand	Sharp
Model	AQUOS wish2
Category	Cell Phone
Language	English