Sharp AQUOS zero

205
Safety Precautions
AQUOS zero
Frequency Range of Supported Bands in
EU
Item Description
GSM 900
Tx 880.2 to 914.8 MHz
Rx 925.2 to 959.8 MHz
DCS 1800
Tx 1710.2 to 1784.8 MHz
Rx 1805.2 to 1879.8 MHz
WCDMA FDD I
Tx 1922.4 to 1977.6 MHz
Rx 2112.4 to 2167.6 MHz
WCDMA FDD
VIII
Tx 882.4 to 912.6 MHz
Rx 927.4 to 957.6 MHz
LTE Band 1
Tx 1922.5 to 1977.5 MHz
Rx 2112.5 to 2167.5 MHz
LTE Band 3
Tx 1710.7 to 1784.3 MHz
Rx 1805.7 to 1879.3 MHz
LTE Band 8
Tx 880.7 to 914.3 MHz
Rx 925.7 to 959.3 MHz
LTE Band 28
Tx 704.5 to 746.5 MHz
Rx 759.5 to 801.5 MHz
Bluetooth
Tx 2402 to 2480 MHz
Rx 2402 to 2480 MHz
WLAN 2.4 GHz
Tx/Rx 2412 to 2472 MHz (BW:20 MHz
only)
WLAN 5 GHz
W52 (U-NII 1):
Tx/Rx 5180 to 5240 MHz (BW:20 MHz)
Tx/Rx 5190 to 5230 MHz (BW:40 MHz)
Tx/Rx 5210 MHz (BW:80 MHz)
W53 (U-NII 2A):
Tx/Rx 5260 to 5320 MHz (BW:20 MHz)
Tx/Rx 5270 to 5310 MHz (BW:40 MHz)
Tx/Rx 5290 MHz (BW:80 MHz)
W56 (U-NII 2C):
Tx/Rx 5500 to 5700 MHz (BW:20 MHz)
Tx/Rx 5510 to 5670 MHz (BW:40 MHz)
Tx/Rx 5530 to 5610 MHz (BW:80 MHz)
NFC Tx/Rx 13.56 MHz
GNSS
GPS:Rx L1 (1575.42 MHz)
GLONASS:Rx G1 (1598.0625 to 1605.375
MHz)
Galileo:Rx E1 (1575.42 MHz)
BeiDou:Rx B1 (1561.098 MHz)
Maximum Transmit Power
Item Description
GSM 900 +33 dBm (Power Class 4)
DCS 1800 +30 dBm (Power Class 1)
WCDMA FDD I +24 dBm (Power Class 3)
WCDMA FDD
VIII
+24 dBm (Power Class 3)
LTE Band 1 +23 dBm (Power Class 3)
LTE Band 3 +23 dBm (Power Class 3)
LTE Band 8 +23 dBm (Power Class 3)
LTE Band 28 +23 dBm (Power Class 3)
Bluetooth +15.0 dBm (Power Class 1)
WLAN 2.4 GHz +17.3 dBm (ANT1 + ANT2)
WLAN 5 GHz +17.3 dBm (ANT1 + ANT2)
NFC 0 dBμA/m at 10 m
Battery Cautions
Use specified Charger only.
Non-specified equipment use may cause Internal Battery to
leak, overheat, burst or ignite, and may cause Charger to
overheat, ignite, malfunction, etc.

Battery is built into handset. Do not dispose of handset with
ordinary refuse; take it to a SoftBank Shop for appropriate
disposal.

Charge handset in ambient temperature 5
o
C - 35
o
C; Internal
Battery may leak/overheat and performance may deteriorate
outside this range.
Volume Level Caution
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
■Headphone Signal Level
The maximum output voltage for Music Player function,
measured in accordance with EN 50332-2, is 120.0 mV.