Sharp AY-X095E - Page 14

AUXILIARY MODE
Use this mode when the remote control is not available.
( TOTURNON _ )
Lift the panel of the indoor unit and press the AUX.
button on the operation panel.
* The red OPERATION lamp on the unit will light up
and the unit will start operating in the AUTO mode.
* The fan speed and temperature setting are set to
AUTO.
(TO TURN OFF)
Press the AUX. button on the operation panel again.
¢ The red OPERATION lamp on the unit will go out.
NOTE:
If the AUX. button is pressed during normal operation, the
unit will turn off.
E-12
a
”
wed
©
Zz
LW