Sharp AY-X095E User Manual

AY CAUTION
» Do not expose the receiver window to strong, direct sunlight, which can adversely affect its
operation. In such case, close the curtains to block the sunlight.
» Use of a fluorescent lamp with a quick starter in the same room might interfere with transmission
of the signal.
» The unit might be affected by signals emitted from the remote control of a television, VCR or
other equipment used in the same room.
» Do not leave the remote control in direct sunlight or near a heater. Also, protect the unit and
remote control from moisture and shock which can discolour or damage them.
ac
2
a
0)
Zz
i
SET CURRENT CLOCK TIME
There are two setting modes: Example: 5 o'clock in the afternoon
12-hour-clock and 24-hour-clock. Display
12-hour-clock pu 5:00
24-hour-clock 17:00
1 To set 12-hour-clock, press the CLOCK
button once in the first step.
To set 24-hour-clock, press the CLOCK
button twice in the first step.
2 Press the TIME ADVANCE or REVERSE
buttons to set the current clock time.
¢ Keep pressing each button to fast-
forward or reverse the time display.
3 Press the SET/C button.
¢ The colon (:) blinks to indicate that the
clock is functioning.
NOTE:
e The current time cannot be set, when the timer
mode is programmed.
E-6
imam a a et te Ra PL A A see Le ee

Sharp AY-X095E Specifications

General

Brand	Sharp
Model	AY-X095E
Category	Air Conditioner
Language	English