Sharp BP-20C20 User Manual

BEFORE USING THE MACHINE
21
Loading envelopes
Only the front side of envelopes can be printed or copied on. Place the front side facing down.
• Do not forcefully push in paper that you are loading. This may cause misfeeds.
• If the bypass tray guides are set wider than the paper, move the bypass tray guides in until they correctly fit the width
of the paper. If the bypass guides are set too wide, the paper may skew or be creased.
• How to close the bypass tray.
Remove any paper remaining in the bypass tray, and press down the centre of the pressure plate until it locks. After
you have locked the pressure plate, close the extension tray and then close the bypass tray.
When loading envelopes in the bypass tray, set the paper type.
►
TRAY SETTINGS (page 22)
When placing C4, C5, or C6
Place the front side
facing down.
Place the front side
facing down.
Flap

Sharp BP-20C20 Specifications

General

Functions	Print, Copy, Scan
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Size	A3, A4, A5, B4, B5
Scan Type	Flatbed, ADF
Print Speed (Black)	20 ppm
Print Speed (Color)	20 ppm
Copy Speed	20 cpm
Connectivity	USB 2.0
Paper Capacity	350 sheets