EasyManuals Logo

Sharp BP-30M28 User Manual

Sharp BP-30M28
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
BEFORE USING THE MACHINE
19
LOADING PAPER IN BYPASS TRAY
1
Open the bypass tray.
If you are loading paper of length greater than 250 mm
(9-27/32"), pull the extension guide all the way out.
Do not place heavy objects on the bypass tray or press down on the tray.
2
Push the centre of the pressure plate
down until it locks into place.
3
Load the paper with the print side
facing down.
Insert the paper along the bypass tray guides all the way into the
bypass tray until it stops slowly. Inserting the paper with excessive
force may cause the leading edge to fold back. Inserting the paper
too loosely may cause skewed feeding or misfeeds.
The paper must not exceed the maximum number of sheets
and must not be higher than the indicator line.
4
Set the bypass tray guides correctly to
the width of the paper.
Adjust the bypass tray guides so that they slightly contact
the loaded paper.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp BP-30M28 and is the answer not in the manual?

Sharp BP-30M28 Specifications

General IconGeneral
FunctionsPrint, Copy, Scan
Print Speed (Black)28 ppm
Print Resolution600 x 600 dpi
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
Duplex PrintingYes
Copy speed Black A4 (max ppm)28 ppm
Paper Capacity350 sheets
InterfaceUSB 2.0
Paper SizeA4, A5, B5
Memory2 GB
Original paper sizeA4
Scan Speed (Mono)37 ipm
Scan Speed (Colour)37 ipm
First print out time (Black)Less than 10 seconds

Related product manuals