DOCUMENT FILING
53
Scan to USB memory device
1
Connect the USB memory device to
the machine.
• Use FAT32 or NTFS format for USB memory device.
• When the format of the USB memory device is FAT32,
use a 32 GB or less USB memory device.
2
When a screen for selecting the action
appears, tap [Scan to External Memory
Device].
• To select detailed settings in normal mode, select the
[Perform Detail Setting] checkbox .
► BASE SCREEN OF
SCANNER
MODE (page 48)
• If the machine/device save screen is open, this screen will
not appear.
3
Tap the [Colour Start] key or [B/W
Start] key.
To check a preview of a document, tap the [Preview] key.
► PREVIEW SCREEN
(page 14)
4
After scanning all originals, tap the
[Read-End] key.
When you scan the original using the automatic document
feeder, this screen does not appear.
5
Check the [Sending data has been
completed.] message, and remove the
USB memory device from the machine.
Operation
Guide
Enlarge
Display Mode
Settings Total Count Brightness
Adjustment
Job Status
10:15
Easy
Copy
Sharp OSA
Toner Quantity Bk
Print from external
memory device (USB)
Scan to External
Memory Device
Perform Detail
Setting
External memory device (USB) is connected.
CA
Preview Auto Set
Address External Memory Device
Detail
B/W
Start
Colour
Start
Address Book Sending History
Global
Address Search
Scan to USB/
Local Drive
Original
A4
Cancel scanning
Cancel
Scan
Address Book
Scan to USB/
Local Drive
CA
Preview
Detail
B/W
Start
Colour
Start
Place next original. (Pg.No.1)
Press [Start].
When finished, press [Read-End].
Change Setting Read-End
Original
A4
Auto Set
To Next Page
Loading...
Need help?
General
