Sharp BP-FN11 - Procedure 3: Running Adjustments Simulation; Simulations and Adjustments

Page 3
Service Success Center: https://service.sharpamericas.com/
Sharp Academy: https://satech.sharpamericas.com/Sharp-Academy
Questions? Contact us at success@sharpsec.com
Procedure 3: Running Adjustments Simulation
Perform the following Simulations:
• Simulation 3-10: Adjustments
Review the “Adjustments and Settings” Section in the BP FN11/12 Service Manual:
• ADJ 1 - Punch PWB Destination Setting
• ADJ 2 - Punch Position Adjustment
Congratulations! You have completed this exercise. Return to your seat for review.