8
Sequence Cooking
Your oven can be programmed with up to 3 automatic cooking sequences, automatically switching from one
variable power setting to the next.
* Suppose you want to cook for 10 minutes on 50% followed by 5 minutes on 100%.
Step Procedure Pad Order Display
1
Enter desired cooking time.
2
Select desired power level by pressing
the POWER LEVEL pad (for 50% press
three times).
x 3
3
For second sequence, enter desired
time for cooking time.
If power is not selected the oven will
operate at 100% power.
4
Press the INSTANT COOK/START pad.
COOK
The timer begins to count down
to zero. When it reaches zero,
COOK
the second sequence will appear
and the timer will begin counting
down to zero again.
Instant Cook™
For your convenience Sharp’s Instant Cook allows you to easily cook for one minute on 100% power.
Step Procedure Pad Order Display
1
Press the INSTANT COOK/START pad.
Within 3 minutes of closing the door.
COOK
The timer begins to count down.
Press the INSTANT COOK/START pad until desired time is displayed.
Each time the pad is pressed, the cook time is increased by 1 minute.
R201T(W) [01-15].indd 8R201T(W) [01-15].indd 8 6/8/10 7:32:09 PM6/8/10 7:32:09 PM
To Next Page
Loading...
Need help?
General
