6
BEFORE OPERATING
Getting Started
Your oven has Energy Save Mode.
This facility saves electricity when the oven is not in use.
To operate the oven.
1. Plug in the oven. Nothing will appear on the display at this time.
2. Open the door the oven lamp will be light.
The display will show :
3. Close the door the oven lamp will be off.
The display will show :
NOTE
If you do not operate the oven for 3 minutes or more (i.e. after closing the door, pressing the STOP/CLEAR
key, or at the end of cooking), you will not be able to operate the oven until you open and close the oven
door. Whilst in Energy Save Mode the display is blank.
Stop/Clear
Press the STOP button once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
To Cancel a Programme During Cooking
Press the STOP button twice.
R-291Z(ST) [01-14].indd 6R-291Z(ST) [01-14].indd 6 6/28/12 9:08:57 AM6/28/12 9:08:57 AM
To Next Page
Loading...
