C O N T R O L S
UULTIl ti-stage
MEMORY FUNCTION
(1) Press "0/MEMORY" repeatedly to choose memory setting 1-3. The display will show 1,2,3.
(2) If the setting has been program ed, press " START/ +30 SEC." to use it. If not,
with your favorite program.
Example: to program the following setting as the second memory to cook food with 80% microwave power
for 3 minutes and 20 seconds.
The steps are as follows:
a. In waiting state, press " 0/MEMORY" twice, the screen displays "2".
b. Press "TIME COOK" once, then press "3", "2", "0" in order.
c. Press " " once, "PL10" displays, then press "8" and "PL8" displays.
e. If power is lost, the "MEMORY"
setting
will
need
to
be
reprogram e
.
(3) After finishing the setting, press " If you press " START/ +30 SEC."
d. Press " " to save the setting. Buzzer sounds once and the LED will display "2". If you press
press "START/+30SEC." to run.
"START/+30SEC." again, the setting will be saved as memory 2 and it will start cooking.
f. If you want to run the saved setting, in waiting state, press "0/MEMORY" twice, screen displays "2", then
again it will start cooking.
m
m
d
create the memory setting
Please note: only one or two stages can be set.
POWER LEVEL
ONE TOUCH COOK
One touch cooking allows you to cook or reheat many of your favorite foods by touching just one pad.
To increase quantity, touch the chosen pad until the number in the display is same as desired quantity to cook.
POPCORN " repeatedly until the package size of your popco appears in the display,
"3.0", "3.5","1.75" will display in order.
five times.
"START/+30 SEC." to cook, buzzer sounds once. When cooking is finished, buzzer will sound
POPCORN
rn(1) Press "
(2) Press
For example, press "POPCORN" once, "3.0" appears.
BEVERAGE " repeatedly until the number you wish appears in the display. "1", "2", "3" cup
will display in order.
For example, press "BEVERAGE" once, "1" appears.
" START/+30 SEC." to cook, buzzer sounds once. When cooking is finish , buzzer will sound
five times.
BEVERAGE
ed
(1) Press "
(2) Press
START/+30SEC." once to save the setting.
START/+30SEC.
To Next Page
Loading...
Need help?
General
