C O N T R O L S
UULTIl ti-stage
MEMORY FUNCTION
(1) Press "0/MEMORY" repeatedly to choose memory setting 1-3. The display will show 1,2,3.
(2) If the setting has been program ed, press " START/ +30 SEC." to use it. If not,
with your favorite program.
Example: to program the following setting as the second memory to cook food with 80% microwave power
for 3 minutes and 20 seconds.
The steps are as follows:
a. In waiting state, press " 0/MEMORY" twice, the screen displays "2".
b. Press "TIME COOK" once, then press "3", "2", "0" in order.
c. Press " " once, "PL10" displays, then press "8" and "PL8" displays.
e. If power is lost, the "0/MEMORY"
setting
will
need
to
be
reprogram e
.
(3) After finishing the setting, press " If you press " START/ +30 SEC."
d. Press " " to save the setting. Buzzer sounds once and the LED will display "2". If you press
press "START/+30SEC." to run.
"START/+30SEC." again, the setting will be saved as memory 2 and it will start cooking.
f. If you want to run the saved setting, in waiting state, press "0/MEMORY" twice, screen displays "2", then
again it will start cooking.
m
m
d
create the memory setting
Please note: only one or two stages can be set.
POWER LEVEL
START/+30SEC." once to save the setting.
START/+30SEC.
MULTI-STAGE COOKING
At most, 2 stages can be set for cooking. In multi-stage cooking, if one stage is defrosting, then defrosting
shall be placed at the first stage automatically.
Note: Auto cooking cannot work in the multi-stage cooking.
Example: if you want to cook with 80% microwave power for 5 minutes + 60% microwave power for 10
minutes. The cooking steps are as follows:
(1) Press "TIME COOK" once, then press "5","0","0" to set the cooking time;
(2) Press "
POWER LEVEL
" once, then press "8" to select 80% microwave power.
(3) Press "TIME COOK" once, then press "1","0","0","0" to set the cooking time;
(4) Press "
" once, then press "6" to select 60% microwave power.
(5) Press "START/ +30 SEC." to start cooking.
POWER LEVEL
To Next Page
Loading...
Need help?
General
