Sharp CE-122 - Page 4

Cautions for strong static electricity and external noise
@ If the pocket computer receives strong static electricity and external noise, the display sometimes changes,
keys do not operate, etc. In such cases, push the all reset switch and input the data and program into
the memory again.
@ In such cases, if you have previously recorded a program and data on tape recorder magnetic tape, it can
be used again.
NOTICE
Your CE-122 is driven by a rechargeable Ni-Cd battery source. In order to have an optimum of performance, please
read this instructions carefully prior to initial operation of the printer after unpacking.
It will be necessary to recharge battery if the printer is to be operated for the first time upon unpacking or left
unused for a period of three months or more.
To recharge the battery, simply connect the AC adaptor (EA-11E only) via the wall outlet with the printer power
switch being off. (See the diagram on Page 3 of the instruction manual).
It will take about 15 hours before the battery is fully charged.
The CE-122 is driven by the Ni-Cd battery.
The low battery indicator will come blinking when it requires recharging.