Sharp CS-2630 - Paper Tape Replacement

Gs; TAPE REPLACEMENT
1. Assemble the paper holder. (See Fig. 1) Be i
2. Insert the leading edge of the paper | into ue epening directly penne. the a
machanism. (See Fig. 2) Bee. dae as we
3. Press the paper feed key and feed the fap under ane edge of vig paper cutter.
(See Fig. 3) ‘ a
4. Place the new roll of tape in the holder at the back Be the calculator. (See Pig: a
Paper halder
Paper feed key
Fig 3D ao Oke ar
DO NOT PULL PAPER BACKWARDS AS THIS MAY CAUSE DAMAGE TO PRINTER
MECHANISM.
33