Sharp CV-2P10SC - To Change Air Flow Direction

EN-20
TO CHANGE AIR FLOW DIRECTION
UP / DOWN AIR FLOW DIRECTION
1
Press the LOUVERS button.
• The horizontal louvers will swing.
2
Press the LOUVERS button again to stop
the desired position.
CAUTIONS:
Never attempt to adjust the horizontal louvers manually.
• Manual adjustment of the horizontal louvers can cause the
unit to malfunction when the remote control is used for ad-
justment.
• When the horizontal louvers are positioned at the lowest
position in the COOL or DEHUMIDIFICATION mode for an
extended period of time, condensation may result.
NOTE:
• During VENTILATION mode, UP/DOWN air ow direction
cannot be changed.
LEFT / RIGHT AIR FLOW DIRECTION
Hold the vertical louver as shown in the diagram
and adjust the air ow direction.
CAUTION:
• Do not adjust the vertical louvers to the extreme left or right
in the COOL mode with the fan speed set to "QUIET ( )"
for an extended period of time.
Condensation may form on the louvers.
USE FOR AIR CONDITIONER
1
2
CV-2P10SC_en.indd 20 11.3.22 11:00:16 AM