Sharp CV10CTXS - Maintenance - Battery Replacement

EN-23
ENGLISH
MAINTENANCE
• Changingbatteriesandnotices
1. Slightly to press the place to take out
the back cover of wireless remote
control.(Asshowningure)
2. Takeouttheoldbatteries.(Asshowin
gure)
3. InserttwonewAAA1.5Vdrybatteries,
andpayattentiontothepolarity.(As
showingure)
4. Attach the back cover of wireless
remotecontrol.(Asshowingure
NOTE:
• Whenchangingthebatteries,donotuse
old or different batteries, otherwise, it
can cause the malfunction of the wireless
remote control.
• Ifthewirelessremotecontrolwillnot
be used for a long time, please take
themout,anddon'tlettheleakingliquid
damage the wireless remote control.
• Theoperationshouldbeinitsreceiving
range.
• Itshouldbeplacedatwhereis1maway
fromtheTVsetorstereosoundsets.
• Ifthewirelessremotecontrolcannot
operate normally, please take them out,
after 30 seconds later and reinsert, if they
cannot normally run, please change them.
.
1
3
4
2