DK-A10 Enhancing
your
system
DK-A10BK
The connection cord is not included. Purchase a commercially
available cord as shown below.
Auto
power
on
function:
When you press any of the following buttons, the unit turns on.
• AUX button (main unit): The unit turns on and the AUX function is
activated.
•
~
/11
button (main unit and remote control): The unit turns on and
playback of the last function starts (iPod,
CD,
TUNER, AUX).
• Listening
to
the playback
sounds
from VCR,
DVD, etc.
1 Use a
connection
cord
to
connect
the
VCR,
DVD
etc.
to
the
AUX IN
jacks.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2 Press
the
ON/STAND-BY
button
to
turn
the
power
on.
3 Press
the
AUX
button
on
the
main
unit
once
or
press
the
FUNCTION
button
on
remote
control
repeatedly
to
select
AUX.
"AUX"
indicator
will
appear.
4 Play
the
connected
equipment.
• Headphones
• Before plugging
in
or unplugging the headphones, reduce the
volume.
• Be sure your headphones have a 1/8" (3.5 mm) diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
• Plugging
in
the headphones disconnects the speakers
automatically. Adjust the volume using the VOL
(+ or
-)
control.
• During alarm activation, sound will be output to the speaker even
if headphones is plugged in.
Note:
To
prevent noise interference, place the unit away
from
the
television.
AUXIN
~-L"'c::!OlJ'z>=/
White
~-R"~Red
VCR, DVD, etc.
~
To the line output jacks
tt
White-
-Red
28
To Next Page
Loading...
