Sharp DK-AP8P - User Manual

Questions and Answers

D
Dale RussellJul 30, 2025
Why is my Sharp DK-AP8P Media Converter not charging my iPod or iPhone?
- B
  Blake MartinJul 30, 2025
  There are several reasons why your Sharp Media Converter might not be charging your iPod or iPhone: * The iPod or iPhone might not be making full contact with the connector. * The main unit could be using batteries as a power supply. * You might be using an iPod (3rd generation). * The iPod or iPhone might not be supported (refer to page 9 for compatible models).
M
Michael ConnerAug 4, 2025
What to do if 'This accessory is not made to work with iPhone' appears on my iPhone screen when using Sharp DK-AP8P Media Converter?
- L
  Lindsey HartAug 4, 2025
  If you see the message “This accessory is not made to work with iPhone” on your iPhone screen while using the Sharp Media Converter, it could be due to the following reasons: * The iPhone battery is low. Please charge the iPhone. * The iPhone is not properly docked.
M
Michael JacksonAug 9, 2025
How to fix a Sharp DK-AP8P Media Converter that does not respond when a button is pressed?
- N
  Nancy BakerAug 9, 2025
  If your Sharp Media Converter doesn't respond when you press a button, set the unit to the power stand-by mode and then turn it back on.
W
woodstaceyAug 14, 2025
Why does 'This accessory is not made to work with iPhone' appear on my Sharp Docking Station?
- S
  Shelly SimpsonAug 14, 2025
  This message may appear on your iPhone screen if the iPhone battery is low. Please charge the iPhone.
J
Jodi BurnsAug 19, 2025
Why is no sound heard from my Sharp Docking Station?
- P
  Phillip SmallSep 12, 2025
  The volume level might be set to the minimum.
C
Christine SimmonsAug 25, 2025
How to fix a Sharp Docking Station that does not respond when a button is pressed?
- E
  Erica BradyAug 25, 2025
  Set the unit to the power stand-by mode and then turn it back on.