EN-13
Troubleshooting/Specifications/Precautions
1）
When using the vacuum cleaner
Please keep away from heaters, such as radiators and cigarette butts, etc.
2）
Before using the vacuum cleaner
Please remove large and sharp objects to prevent the machine from being damaged
after collision. Do not suck up flammable materials or liquids, such as gasoline
or cigarettes, alcohol, etc.
3）Do not turn the machine upside down when replacing the filter to prevent liquid or
dust from falling into the motor, causing faults and dangers.
※
※Precautions
※ roubleshooting
Specifications:
Power supply Input 100-240V~50-60Hz (Charger)
Power supply method Rechargeable type ( lithium ion battery,25.9V )
Electric power consumption
While charging : Approx. 24W; After charging : Approx. 0W
Continuous operation time Low: Approx. 48 mins
Medium: Approx. 22 mins
High: Approx. 10 mins
Dust collecting capacity 0.7L
Charging time 3-4 hrs
Weight(Charger) 111g
Base unit dimensions 250mm W ×1070mm H × 200mm D
Charger dimensions 51mm W ×36mm H × 77mm D
Cord length（Charger） 180cm
3kg
Weight(Suction head,pipe,
base unit and battery included)
1. Empty the dust cup
3. Check if the filter case and the filter are installed
2. Check if the dust cup is installed correctly
correctly
4. Clean the filter
1. Charge the vacuum
2. Clean the rolling brush and the bearing thoroughly
1. Check if the plug has been inserted already
2. Check if the socket is useful
Suction gets weak
Stop working
Battery doesn’t hold
a charger
To Next Page
Loading...
