Sharp EL-506P

Real number enter/coordinate conversion key
W : • This is used when the real parts of complex numbers are
to be inputted and when calling the real parts of calculation
resu lts .
• This is used during coordinate convers i ons when the X
coordinate of the Rectangular coordinates (X , Y) is input or
when the r of the palar coordinates (r, ()) is i nput . lt is also
used far calling the calculated values of X o r r .
Example : Referto page 33.
~ @ : Converts rectangular coordinate i nto palar coord i nate .
Example: Referto page 33 .
lmaginary number enter/coordinate conversion key
w = •
•
This is used when the imaginary parts of comp lex numbers
are to be input and when calling the imag i nary parts of the
calculation results.
This is used during coordinate convers i ons when the Y
coordinate of the Rectangular coordinates (X, Y) is input or
when the () of the palar coordinates (r, ()) is input . lt is also
used far calling the calculated values of Y or ().
Example : Referto page 33 .
75