Sharp EL-506P - Page 87

RAD: Radian mode symbol
Appears when the radian mode is designated or shows that the angular
mode of the converted result is in radian.
GRAD: Grad mode symbol
Appears when the 9rad mode is designated or shows that the angular
mode of the converted result is in grad.
Parenthesis symbol
Appears when a calculation with parenthesis is performed by depressing
the OJ key.
lllm Appears when the binary system mode is set or shows the displayed
number is a binary number .
[!Iii Appears when the octal system mode is set or shows the displayed
number is an octal number .
l:I}J Appears when the hexadecimal system mode is set or shows the dis-
played number is a hexadecimal number .
85