Change to the COMP MODE
N I /
Press IcompI ; the display will read A = 7 ?^
The flashing 7 ?v asks you to place in a number
Put in 2
N1 /
Press [comp] and get B = -?^
Put in 3
Note that in the AER mode two variables were used, therefore, the calculator will not ask for a value of C.
If two variables such as E and H had been used, the calculator would have only asked for these.
Press IcompI and get ANS 1 = 13
Press IcoMPj again and get ANS 2 =181
Press IcompI again and get ANS 3 = .315601274
Only three equations were placed in the AER Mode. Note that the maximum number of equations on a
Line is 9.
To Next Page
Loading...
