EasyManuals Logo

Sharp KB-6015KS Installation Manual

Sharp KB-6015KS
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
J
J
J
INSTALLATION MANUAL
2x4 _n_;
Figure 1
Figures 1and 2 contain many Microwave Drawer measurements
for reference when planning the drawer's location.
Figure 2
Figure 3
Figure 4
2x4 Anti-
Tip block
3
NORMAL INSTALLATION STEPS
ANTI-TIP BLOCK INSTALLATION INSTRUCTIONS
To reduce the risk of tipping of the drawer, the Anti-Tip block
must be properly installed located 143/4-inches above the floor on
which the Microwave Drawer will sit. The 6-inch 2 x 4 Anti-Tip
block must be provided b5 the installer. See Figures l, 2 and 4.
The Anti-Tip block prevents serious injury that might result from
spilled hot liquids.
If the Microwave Drawer is ever moved to a different location, the
Anti-Tip block must also be moved and installed. When installed
to the wall. make sure that the screws completely penetrate the
dry wall and are secured in wood or metal so that the block is
totally stable. WheH fastening, be sure that the screws do not
penetrate electrical wiring or plumbing.

Other manuals for Sharp KB-6015KS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp KB-6015KS and is the answer not in the manual?

Sharp KB-6015KS Specifications

General IconGeneral
BrandSharp
ModelKB-6015KS
CategoryLCD Drawer
LanguageEnglish

Related product manuals