EasyManuals Logo

Sharp LC-32CHE6132E Service Manual

Sharp LC-32CHE6132E
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #88 background imageLoading...
Page #88 background image
88
C Upgrade Process
• Connect serial port tools
• Connect the PC and main board with network cable, connect the serial port. Set the cable
adapter IP as 192.168.1.100.
• Connect serial port, and then power on, press enter button until nugget # display.
• Connect the serial port, enter the following command to set main board and tftp server IP.
setenv ipaddr 192.168.1.101
setenv serverip 192.168.1.100
saveenv
es

Table of Contents

Other manuals for Sharp LC-32CHE6132E

Preview: User Manual
User Manual20 pages

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-32CHE6132E and is the answer not in the manual?

Sharp LC-32CHE6132E Specifications

General IconGeneral
Screen shapeFlat
Response time- ms
Display diagonal32 \
Display brightness300 cd/m²
Display resolution1366 x 768 pixels
Display technologyLED
Native aspect ratio16:9
LED backlighting typeEdge-LED
Contrast ratio (dynamic)1000000:1
Display diagonal (metric)81 cm
Supported graphics resolutions1366 x 768
Motion interpolation technologyActive Motion 200
3DNo
Supported file systemsFAT16, FAT32, NTFS
Annual energy consumption45 kWh
Audio decodersDTS 2.0, DTS TruSurround, Dolby Digital DTS, Dolby Digital Plus
RMS rated power16 W
Number of speakers2
Tuner typeAnalog & digital
Analog signal format systemPAL, SECAM
Digital signal format systemDVB-C, DVB-S2, DVB-T, DVB-T2, ISDB-S
HDMI ports quantity3
DVI-D ports quantity0
Common interface (CI)-
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports1
Audio formats supportedAAC, AC3, EAC3, M4A, MP3, OGG, WMA
Image formats supportedBMP, JPG, PNG
Video formats supportedASF, AVI, FLV, M2TS, M4V, MKV, MP4, MPG, RM, RMVB, SWF, VOB, WMV
AC input voltage220 - 240 V
AC input frequency50 Hz
Power consumption (max)70 W
Power consumption (standby)0.5 W
Power consumption (typical)45 W
Power consumption (PowerSave)31 W
Product colorBlack
Panel mounting interface200 x 100 mm
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)159.6 mm
Height (with stand)467.3 mm
Depth (without stand)69.3 mm
Width (without stand)732.7 mm
Height (without stand)432 mm
Weight (without stand)4500 g

Related product manuals