40″ TV shown
OR
How do I prepare my TV for wall mounting? (not for use with the TV stands)
You’ll need: Phillips screwdriver and a soft surface to lay your TV on.
1 Carefully place your TV face-down on a cushioned, clean surface.
2 See the instructions that came with your wall mount for more information about how to correctly mount your TV.
32″ VESA Mounting Pattern
VESA mount (200x200mm): M6 type screw, minimum length 10 mm
40″ VESA Mounting Pattern
VESA mount (200x200mm): M6 type screw, minimum length 10 mm
This apparatus is intended to be supported by a UL Listed Wall Mount Bracket, marked with the minimum weight of
6.5 kg
Wall mount installation guide (not included)
Your TV has four VESA mounting holes on the back. If you attach a wall-mount bracket to the back of your TV, the
bracket must be securely attached, using all four holes. If you do not use all four mounting holes, your TV
may fall and cause property damage or personal injury. See the documentation that came with your wall mount for
complete mounting instructions.
STOP!
Do not plug your power cord in until all other devices have been connected
Included accessories
Remote control
and two AAA
batteries
32″
To Next Page
Loading...
