EasyManuals Logo

Sharp LC-32LD145E B User Manual

Sharp LC-32LD145E B
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
34
LC-39LD145
LC-32LD145
S/PDIF interface
Supports SPDIF in bypass
SPDIF out
Analog TV IF Demodulator
Supports world-wide analog TV standard
Accept direct IF and low IF
Full digital AGC control and carrier recovery
Embedded SAW filter and IF Amplifier. Cost effective TV front-end structure and no more cost on:
External analog SAW filters (Video/Audio)
External analog IF demodulator
External peripheral circuit on CVBS signal data path
External SAW filter and IF VGA on tuner
Peripherals
Three built-in UARTs with Tx and Rx FIFO
Ten basic serial interfaces: one is for the tuner, four are the masters for general purpose and two of them
can be active in standby mode, one is the slave for VGA DDC, the other four extra slave serial interfaces
used for HDMI
EDID data
Five PWMs, two of them can be active in standby mode
IR receiver D Real-time clock and watchdog controller
Built-in 2-link USB2.0/1.1, both of them support external hub with 16 endpoints.
Built-in uP for standby mode
Supports SDIO interface
Supports smart card interface
Supports two serial flash or one serial and one NAND flash
Supports 4-input low-speed ADC
Supports boundary scan (JTAG)
IC Outline
LQFP Package 256 pins with E-pad
3.3V/1.2V and 1.8V for DDR2 or 1.5V for DDR3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-32LD145E B and is the answer not in the manual?

Sharp LC-32LD145E B Specifications

General IconGeneral
BrandSharp
ModelLC-32LD145E B
CategoryLCD TV
LanguageEnglish

Related product manuals