EasyManuals Logo

Sharp LC-32LD165E User Manual

Sharp LC-32LD165E
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
12
-
Appendix
Troubleshooting
Problem Possible Solution
No picture 1� Connect power cord correctly
2� Turn on power
3� Connect signal cable correctly
4� Press any button on the LCD TV
Abnormal colours Connect signal cable correctly
Twisted picture 1� Connect signal cable correctly
2� Please use compatible signal�
Picture too dark Adjust brightness and contrast�
Audio only, no images 1� Please check if input signal is connected correctly
2� TV-RF signal must not be lower than 50dB�
Picture only, no audio 1� Connect signal cable correctly
2� Adjust volume to proper level�
3� Connect audio signal cable correctly
4� TV-RF signal must not be lower than 50dB�
Cannot use remote control 1� Please change battery
2� Turn off power for 10 seconds; and then restart power
Cannot receive sufficient channels
through antenna
Please use the Channel Scan function to increase the number of channels not
included in memory
No colour Please adjust the colour setup�
Blinking picture accompanied by ghost
image
1� Check the connection of antenna/signal cable�
2� Check if channel is in play mode�
3� Press signal source and change input mode�
Broken lines or segments Adjust antenna�
Keep the TV away from noise sources, such as automobiles, neon lights, and
hair dryers�
Certain TV channels are blocked (Hope
to acquire some channels)
Please use the Update Scan method to add the channels not included in
memory
Overlapping images or ghost images Please use multi-directional outdoor antenna�
(If your TV is subject to the influence of nearby mountains or buildings)�
Cannot use a function If the item you choose turns gray, that item cannot be selected�
Cannot receive programmes Please use the Update Scan method to add the channels not included in
memory
Environmental specifications
Item 32” 42” 46” 50”
*1 On-Mode (W) Standard 40W 68W 69W 83W
*2 Energy-Save-Mode (W) Eco > On 32W 54W 55W 67W
*3 Standby-Mode (W) 0�26W 0�28W 0�28W 0�28W
*4 Annual Energy Consumption (kWh) 58kWh 99kWh 101kWh 121kWh
*5 Annual Energy Consumption (kWh)
(Energy-Save-Mode)
Eco > On 46�8kWh 79kWh 81kWh 98kWh
6 Energy Classification Class A Class A Class A Class A
*1 Measured according to IEC 62087 Ed� 2 / Ed� 3
*2 For further information about the Energy Save function, please see related pages in this operation manual
*3 Measured according to EN 50564: 2011
*4 Annual energy consumption is calculated on the basis of the On-Mode (Standard) power consumption, watching TV 4
hours a day, 365 days a year
*5 Annual energy consumption is calculated on the basis of the Energy-Save-Mode power consumption, watching TV 4
hours a day, 365 days a year
NOTE
• The power consumption of On-Mode varies depending on the images the TV displays�

Other manuals for Sharp LC-32LD165E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-32LD165E and is the answer not in the manual?

Sharp LC-32LD165E Specifications

General IconGeneral
BrandSharp
ModelLC-32LD165E
CategoryLCD TV
LanguageEnglish

Related product manuals