Sharp LC-40CFE6352E Service Manual

88
C Upgrade Process
• Connect serial port tools
• Connect the PC and main board with network cable, connect the serial port. Set the cable
adapter IP as 192.168.1.100.
• Connect serial port, and then power on, press enter button until nugget # display.
• Connect the serial port, enter the following command to set main board and tftp server IP.
setenv ipaddr 192.168.1.101
setenv serverip 192.168.1.100
saveenv
es

Sharp LC-40CFE6352E Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	40 \
Display brightness	280 cd/m²
Native aspect ratio	16:9
LED backlighting type	Direct-LED
Contrast ratio (dynamic)	1000000:1
Display diagonal (metric)	100 cm
Motion interpolation frequency	400 Hz
Motion interpolation technology	-
3D	No
Annual energy consumption	66 kWh
Power consumption (average)	45 W
Tuner type	Analog & digital
Analog signal format system	PAL, SECAM
Digital signal format system	DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2
Video apps	YouTube
Lifestyle apps	Facebook, Twitter
Audio decoders	DTS, Dolby Digital
RMS rated power	16 W
Number of speakers	2
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Consumer Electronics Control (CEC)	Aquos Net+
Certification	CE, CB, ErP
Sustainability certificates	ENERGY STAR
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (max)	80 W
Power consumption (standby)	0.5 W
Product color	Black
Panel mounting interface	400 x 200 mm

Weight and Dimensions

Depth (with stand)	186.2 mm
Height (with stand)	569.1 mm
Weight (with stand)	9400 g
Depth (without stand)	67.1 mm
Width (without stand)	916.8 mm
Height (without stand)	545.7 mm
Weight (without stand)	7800 g