Sharp LC-40E67U - Page 44

LC-40E67U/LC-40E77U
5 – 26
4. Public Mode Menu
The guidance is not displayed on screen.
Setup procedure
• To move the cursor up and down, use the “cursor UP/DOWN” key (remote controller) and “CH ( )/( )” key (remote controller and set).
• To change the settings, use the “cursor RIGHT/LEFT” key (remote controller) and “VOL (+)/(–)” key (remote controller and set).
• To save new settings, keep the cursor at “ENTER” and use “ENTER” key (remote controller and set).
PUBLIC MODE
POWER ON FIXED [VARIABLE ]
MAXIMUM VOLUME [ 60 ]
VOLUME FIXED [VARIABLE ]
VOLUME FIXED LEVEL [ 20 ]
RC BUTTON [RESPOND ]
PANEL BUTTON [RESPOND ]
MENU BUTTON [RESPOND ]
ON SCREEN DISPLAY [YES ]
BLUE SCREEN [NO ]
INPUT MODE START [NORMAL ]
INPUT MODE FIXED [VARIABLE ]
RC_PATH_THROUGH [OFF ]
RESET
ENTER