LC-40E67U/LC-40E77U
5 – 29
11)INPUT MODE FIXED
12)RC_PATH_THROUGH
Selection Selection between “Variable”, “Fixed”. (loop provided)
Default – (Variable)
Explanation The input mode is fixed at the input source or the channel set at the “Input mode start” in 10 and other input sources and chan-
nels can be made non-selectable.
Limit in Setting • With the execution of hotel mode, the input source is forced to change to that set by “Input mode start” and the channel
switching and input switching are prohibited thereafter.
• ON-timer's (Wake-up timer) channel items are not displayed or the operation is prohibited. (Basically, they are not dis-
played.)
• The following keys are invalidated.
CH / , direct tuning button, FLASHBACK, input
However, the keys (input switching and CH / keys) of the unit for menu operation remain valid.
Exception None
Remarks • In the following case, setting is cancelled and mode is changed to “Variable”.
When the setting of “Input mode start” is set to “Normal”.
Selection Selection between “OFF”, “ON: TV RCE” and “ON: TV RCD” (loop provided)
Default OFF
Explanation Function to feed the remote controller-received signal to Pin 9 (open) on the RS232C.
Limit in Setting None
Exception None
Remarks None
1
To Next Page
Loading...
