Sharp LC-40LE280X - Page 26

3.MAXIMUM VOLUME
4.VOLUME FIXED
Default
AC CTRL : The unit stars at the volume ƐƉĞĐŝĮĞĚ in the volume ĮdžĞĚ level,when power is
AC/RC CTRL : The unit starts at the volume ƐƉĞĐŝĮĞĚ in the volume ĮdžĞĚ level ,when power is
( AC JON,remote control JON,main unit's Key JON )
In "Variable" ƐĞƫŶŐ ,the ƐŽƵŶĚ volume ŚĂĚ been ĐŽŶǀĞŶƟŽŶĂůůLJ set at 1 but this ŽƉĞƌĂƟŽŶ has been
ĂďŽůŝƐŚĞĚ ;ĂŶĚ follow the last memory ).
The ƐŽƵŶĚ volume form the ON-ƟŵĞ is not set at 1 either ĂŶĚ the ƐŽƵŶĚ volume set value of the
ON-ƟŵĞƌ before the hotel ŵŽĚĞ is ĞdžĞĐƵƚĞĚ .
^ĞƫŶŐ is ǀĂůŝĚ only for the speakers of the unit.(As for the ŚĞĂĚƉŚŽŶĞƚŚĞ ƐŽƵŶĚ volume can be set up to 60
ŝƌƌĞƐƉĞĐƟǀĞ of the limit. )
In line output ;ƐŽƵŶĚ volume variable ),the ƐŽƵŶĚ volume can be ĂĚũƵƐƚĞĚ from -60 to 0 ŝƌƌĞƐƉĞĐƟǀĞ of
pre-ĂĚũƵƐƚĞĚ value.
As for ƐŽƵŶĚ volume ĮdžŝŶŐ ĂŶĚ ƐŽƵŶĚ volume MAX level,the ƐŽƵŶĚ volume ĮdžŝŶŐ has priority.
Once the ƐŽƵŶĚ volume has been ĐŚĂŶŐĞĚ by ĂĚũƵƐƚŵĞŶƚ process or ŚĞĂĚƉŚŽŶĞŝƚ shoul be set back to the ƐŽƵŶĚ
volume preset by ƐŽƵŶĚ volume ĮdžŝŶŐ level when the ĂĚũƵƐƚŵĞŶƚ process
ĞŶĚƐ or when the ŚĞĂĚƉŚŽŶĞ is ƌĞŵŽǀĞĚ
5.VOLUME FIXED LEVEL
6.R/C BUTTON
Limit in ƐĞƫŶŐ
džĐĞƉƟŽŶ
In the item "VOLUME" of ĂĚũƵƐƚŵĞŶƚ process ,the ƐŽƵŶĚ volume can be set freely ŝƌƌĞƐƉĞĐƟǀĞ of this ƐĞƫŶŐ .
When the ƐŽƵŶĚ volume is set lower than 99,only ĮŐƵƌĞƐ are ĚŝƐƉůĂLJĞĚ ĂŶĚ the ƐŽƵŶĚ volume bar is not ĚŝƐƉůĂLJĞĚ
The ŵĂdžŝŵƵŵ ƐŽƵŶĚ volume for ON-ƟŵĞƌ (WAKE UP TIMER)is ůŝŵŝƚĞĚ also to the preset value.
^ĞůĞĐƟŽŶ
Default
džƉůĂŶĂƟŽŶ
^ŽƵŶĚ volume not be ĂĚũƵƐƚĞĚ ŚŝŐŚĞƌ than the preset value.
100
ĚũƵƐƚŵĞŶƚ from 1 to 100 (no loop )
FIXED : The volume is ĮdžĞĚ to the value ĂĚũƵƐƚĞĚ in the volume ĮdžĞĚ level .
ƚƵƌŶĞĚ on in the case of the AC-ON only.
ƚƵƌŶĞĚ on any case .
džƉůĂŶĂƟŽŶ
Remark
^ĞƫŶŐ is ǀĂůŝĚ only for the speakers of the unit .(As for the ŚĞĂĚƉŚŽŶĞƚŚĞ ƐŽƵŶĚ volume can be set up to 100
ŝƌƌĞƐƉĞĐƟǀĞ of the limit.)
In line output ;ƐŽƵŶĚ volume variable ),the ƐŽƵŶĚ volume can be ĂĚũƵƐƚĞĚ from-100 to 0 ŝƌƌĞƐƉĞĐƟǀĞ of pre-ĂĚũƵƐƚĞĚ
value.
When
the ƐŽƵŶĚ volume is set ŚŝŐŚĞƌ than the MAX ƐĞƫŶŐ by the ĂĚũƵƐƟŶŐ process or ŚĞĂĚƉŚŽŶĞ ,the ƐŽƵŶĚ volume control
ŽƉĞƌĂƟŽŶ is ƉƌŽŚŝďŝƚĞĚ for turn-up ĂŶĚ the ƐŽƵŶĚ volume ƐŚŽƵůĚ be ƚƵƌŶĞĚ ĚŽǁŶ to MAX in this state.
KƉƟŽŶ "VARIABLE","FIXED","AC CTRL "or "AC/RC CTRL " (loop ĞŶĂďůĞĚͿ
"VARIABLE"
VARIABLE : The volume is not ĮdžĞĚ .
džƉůĂŶĂƟŽŶ The ƐŽƵŶĚ volume to be ĮdžĞĚ by "volume ĮdžĞĚ "is ĚĞƚĞƌŵŝŶĞĚ
Limit in ƐĞƫŶŐ
The ƐŽƵŶĚ volume for the ON-ƟŵĞƌ (wake up ƟŵĞƌͿ is ĮdžĞĚ also without ĚŝƐƉůĂLJ of ŵĞŶƵĞƐŝĚĞƐƚŚĞ ƐĞƫŶŐ is ŵĂĚĞ
impossible .(Basically ,the manu is not ĚŝƐƉůĂLJĞĚͿ
The ĨŽůůŽǁŝŶŐ keys become ŝŶǀĂůŝĚ
1) ^ŽƵŶĚ volume Up/Down(Vol +/- )( for both remote control ĂŶĚ the unit )
2)Mute ( MUTE )
In the item "VOLUME"af ĂĚũƵƐƚŵĞŶƚ process ,the ƐŽƵŶĚ volume can be set freely ŝƌƌĞƐƉĞĐƟǀĞ ot the ƐĞƫŶŐ
džĐĞƉƟŽŶ
Remark
^ĞůĞĐƟŽŶ
ĚũƵƐƚŵĞŶƚ from 1 to 100 (no loop )
Default 30
Limit in ƐĞƫŶŐ None
džĐĞƉƟŽŶ None
Remarks
^ĞƫŶŐ is ǀĂůŝĚ only when "Volume ĮdžĞĚ "is ƐĞůĞĐƚĞĚ for ΗĮdžĞĚΗ
This must be ĐŽŶĮƌŵĞĚ actually by ĐŚĂŶŐŝŶŐ also the ƐŽƵŶĚ volume in ĂĐĐŽƌĚĂŶĐĞ with ƐĞƫŶŐ
^ĞůĞĐƟŽŶ ^ĞůĞĐƟŽŶ between ΗZĞƐƉŽŶĚΗΗEŽ ƌĞƐƉŽŶĚ ΗĂŶĚ Η>ŝŵŝƚĞĚΗ (loop ƉƌŽǀŝĚĞͿ
ĚnopseRtluafeD
džƉůĂŶĂƟŽŶ
The ŽƉĞƌĂƟŽŶ of the remote control's Keys is set.
ZĞƐƉŽŶĚ :The remote control's Keys in the normal state are ĞŶĂďůĞĚ
No ƌĞƐƉŽŶĚ
:The remote control's Keys in the normal state are ĚŝƐĂďůĞĚ
The POWER Key ( RECEPTIONS /STANDBY Key ) is also ĚŝƐĂďůĞĚ
>ŝŵŝƚĞĚ :Only a part of Keys (CHANNEL,etc)is ĞŶĂďůĞĚ ĂŶĚ other keys are ĚŝƐĂďůĞĚ
Limit in ƐĞƫŶŐ 1) In ΗůŝŵŝƚĞĚΗ ƐĞƫŶŐŽŶůLJ power KEK&&ƐŽƵŶĚ volume Ÿ źƚƵŶŝŶŐ Ÿ ź ĂŶĚ BACKLIGHT ;ďƌŝŐŚƚŶĞƐƐ sensor )are
ĂĐĐĞƉƚĞĚ .
2) In "No ƌĞƐƉŽŶĚΗƐĞƫŶŐĂůů the keys ;ŝŶĐůƵĚŝŶŐ the power key )are not ĂĐĐĞƉƚĞĚ
ĚũƵƐƚŵĞŶƚ process,factory ƐĞƫŶŐŝŶƐƉĞĐƟŽŶ process ĂŶĚ hotel only keys are ǀĂůŝĚ ŝƌƌĞƐƉĞĐƟǀĞ of ƐĞƫŶŐ
All the keys can be ƵƐĞĚ in ĂĚũƵƐƚŵĞŶƚ ƉƌŽĐĞƐƐŝŶƐƉĞĐƟŽŶ ŵŽĚĞ ĂŶĚ hotel menu ŝƌƌĞƐƉĞĐƟǀĞ of ƐĞƫŶŐ
džĐĞƉƟŽŶ
Remarks