3
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
1
Confi rm the screws supplied with the TV.
COMPONENT
/AV INPUT
Soft cushion
Screw driver
Screw
Stand base guide pins
Guide pin holes
Table edge
Screws (
m
4)
(used in step 3)
2
Insert the stand base guide pins to the stand
holes on the rear of the TV. (
1
)
•
Make sure the symbol on the stand base is parallel
with the triangle symbol located at the back of the TV.
3
Insert and tighten the 4 screws into the 4 holes on the rear
of the stand base. (
2
)
NOTE
• To detach the stand, perform the steps in reverse order.
• The TV position setting is set to 7˚ backward after attaching the stand.
• Do not remove the plastic wrap before attaching the stand base to
protect it from scratches.
• The bottom area of the set (curvy area) must be beyond the table’s
edge to prevent the TV from damage.
Antenna connection
Connect antenna cable to the antenna terminal
or
If your outdoor antenna uses a 75-ohm coaxial cable with a
standard DIN45325 plug (IEC 169-2), plug it into the antenna
jack at the rear of the set.
If your outdoor antenna uses a 300-ohm twin-lead fl at feeder,
connect a 300-ohm to 75-ohm impedance converter and plug it
into the antenna jack at the rear of the set.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD
CONNECTED.
NOTE
• Place the TV close to the AC outlet, and keep the power plug within reach.
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box) and PC. To view external source images, select the input source from INPUT on the remote control
unit or INPUT on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top
Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
LC32LE355M_EN_A5.indd 3LC32LE355M_EN_A5.indd 3 6/24/2013 3:29:14 PM6/24/2013 3:29:14 PM
To Next Page
Loading...
