To Next Page

To Previous Page

Attach the Wall Mount Bracket (not included)

Before you begin the third-party manufacturer instructions, be

sure to do the following things:

1.Place the TV face down on a clean, safe and cushioned surface.

2.Remove the TV stand if you already attached it.

3.Place the spacers (not included) in the corresponding bracket

holes.

CAUTION:

• Whenyouattachthemount,besuretousethespacers

(providedbythethird-partymanufacturer)betweentheTV

and the

bracket.

Screw

(not provided)

Bracket

(not provided)

Spacer

(not provided)

• TopreventinternaldamagetotheTVandensureitis

mountedsecurely,besuretousexingscrews(not

provided)thatare

8-10mminlengthwhenmeasuredfrom

the attaching surface of the mounting hook.

FollowinstructionsprovidedwiththeWallmountbracket.

● Tocompletetheinstallation,pleasecontactthewall-mount

manufacturer or the retailer from which you purchased the TV.

● Theselectedscrewsare8-10mminlengthwhenmeasured

from the attaching surface of the rear cover.

NOTE:Thediameterandlengthofthescrewsdiffer

dependingonthewallmountbracketmodel.

Rear cover of the TV Spacer

Screw

Wall mount bracket

8 - 10 mm

all mount hole pattern

VESA (mm)

200 × 200

Wall mount screw size (mm) M6

Sharp LC-40Q3020U User Manual

Questions and Answers: