27
TV Menu Operation
SETTINGS - LOCK MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
System Lock - Allows you to lock or unlock the menu. You will be asked to enter a 4 digit password
Use the
◄ button to quit the password input or use the ► button to clear. Default password is 0000.
Set Password - Allows you to change the password.
Channel Lock - Allows you to lock certain channels manually.
Parental Guidance - Allows you to set the rating to block certain content based on age information.
Key Lock - Allows you to lock the buttons on the side of the TV set.
Source Lock - Allows you to lock the source menu.
Hotel Mode - Additional settings.
Note: To enable controls within the lock menu, the function needs to be enabled by entering the
password and then turn the ‘System Lock’ on.
Note: If you change and forget the password, you will need to use the master reset password of 4711.
UNI - User Guide - Sharp SMART UHD LED TV with Freeview HD models.indd Sec1:27UNI - User Guide - Sharp SMART UHD LED TV with Freeview HD models.indd Sec1:27 27/03/2018 15:46:5227/03/2018 15:46:52
To Next Page
Loading...
