Sharp LC-50LE442U User Manual

shrp_10_6722_1.pke
IP Link
®
Device Interface
Communication Sheet
Revision: 8/6/2013
Page 1 of 4
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user's manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Version History:
Device Specifications:
Device Type: Display
Manufacturer: Sharp
Firmware Version: N/A
Model(s): LC-50LE442U
Driver
Version Date
IP Link
Compiler
GC
Version Notes
1 7/26/2013 1.6.0 3.5.0 Initial version.
Driver Notes:
 The Driver has been optimized for volume.

Sharp LC-50LE442U Specifications

General

Brand	Sharp
Model	LC-50LE442U
Category	LED TV
Language	English

Summary

Device Specifications

Device Type

Specifies the type of display device being interfaced.

Manufacturer

Identifies the company that manufactured the device.

Firmware Version

Indicates the current firmware version installed on the device.

Model

Details the specific model number of the device.

Version History

Driver Version 1

Details the initial version of the driver, including date, compiler, and GC versions.

Driver Notes

Volume Optimization

Notes that the driver has been optimized specifically for volume control.

Control Commands and States

Aspect Ratio Commands

Lists available commands for controlling the display's aspect ratio.

Channel TV Step Commands

Details commands for stepping through TV channels.

Input Selection Commands

Provides commands for selecting different input sources.

Mute Control Commands

Specifies commands for muting and unmuting audio.

Power Control Commands

Lists commands for controlling the power state of the device.

Volume Control Commands

Details commands for discrete volume adjustments.

Available Status: Aspect Ratio

Lists the available status states for the aspect ratio setting.

Available Status: Connection

Details the available status states for the connection.

Available Status: Input

Lists the available status states for input sources.

Available Status: Mute

Specifies the available status states for the mute function.

Available Status: Power Control

Details the available status states for power control.

Available Status: Volume

Lists the available status states for discrete volume.

MLC60 Series Supported Commands

Aspect Ratio Commands MLC60

Supported commands for aspect ratio on MLC60 series.

Channel TV Step Commands MLC60

Supported commands for channel stepping on MLC60 series.

Input Selection Commands MLC60

Supported commands for input selection on MLC60 series.

Mute Control Commands MLC60

Supported commands for mute control on MLC60 series.

Power Control Commands MLC60

Supported commands for power control on MLC60 series.

Volume Control Commands MLC60

Supported commands for discrete volume on MLC60 series.

Cable and Adapter Requirements

RS232 Null Modem Cable

Specifies the need for a Female-to-Female RS232 DB9 Null Modem Serial Cable.

Serial Communication Settings

Port Type

Defines the serial port type as RS-232.

Baud Rate

Specifies the baud rate for serial communication.

Data Bits

Indicates the number of data bits for serial communication.

Parity

Defines the parity setting for serial communication.

Stop Bits

Specifies the number of stop bits for serial communication.

Flow Control

Indicates the flow control setting for serial communication.

Pin Assignments Diagram

IP Link Device Interface Pins

Details pin assignments for the RS232 DB9 Male connector on the IP Link Device Interface.

Display Device Pins

Details pin assignments for the RS232 DB9 Male connector on the Display.

General Notes