35
<External input D-SUB>No picture on the display (8)
Does not the picture display when VGA cable plugged into D-SUB ?
Is Video format correct?
Set the timing which TV is support?
NO
Terminal
Is R/G/B/H/V signal sent to pin (1)/RED,
(2)/Green, (3)/BLUE, (14)/H sync#,
Is R/G/B/H/V signal sent to pin
(32)/RED, (30)/Green, (28)/BLUE,
YES
Main UNIT:
YES
Refer to “The picture doesn't appear in
Check the setting of an external input
device that connects of CN1101
NO
Check the line between IC U2102 and
NO
YES
To Next Page
Loading...
