To Next Page

To Previous Page

LC-60LE635

LC-60LE638

Software Updating (Continued)

6. The caution for update showes up.

• The picture will temporary go dark until the software update display apeeares

• Wait several minutes and don't unplug the AC cord

Select OK when if there is no problem.

7. Software update starts.

Please wait for a while until the bar shows 100%

NOTE: Do not take out the USB memory device during updating.

Update version

xxxxxxxxxxxx

75%

[Information Software update USB update]

Now updating

Remote control operation is disabled during update process.

Do not unplug AC cord.

8. When all the procedures are complete, the following upgrade success screen shows up.

The new software version can be confirmed on screen.

After a while, Turn off power and boot-up automaticaly.

NOTE: TV is restarted automaticaly, the AC code need not be pulled out.

9. After boot-up, the following caution shows up.

Select OK when if there is no problem.

Software update is completed, please remove the USB memory device.

NOTE: Then get the set started and call the process adjustment screen (Top Page) to check the main software version.

Update version

xxxxxxxxxxxx

[Information Software update USB update]

Software Update is complete.

System software was successfully updated.

Remove the USB memory device.

Update version

: EXXXXXXX-2

Sharp LC-52/60LE830E/RU/E[B]/RU[B] User Manual

Other manuals for Sharp LC-52/60LE830E/RU/E[B]/RU[B]