Sharp LC-60G9T - Page 46

LC-60G9T / LC-70G9T
6 – 4
No sound from external input devices (3)
Does not the sound of the audio signal input to HDMI-2 mode go out? Does not the sound of the audio signal input to PC/Component
mode go out?
Check whether it is selected "HDMI+Analog" by the Audio select
under Menu-Setup-Option-Terminal setting-Audio select.
Check whether it is selected "Video+Audio" by the Audio select
under Menu-Setup-Option-Terminal setting-Audio select.
Do a udio signals input to pins [2/PC_HDMI_L , 3/PC_HDMI_R] of J501( PC AUDIO_IN) ?
YES
NO
Check the setting of an exter nal input device that connects with
J501.
Do a udio signals input to pins[AP32/PC_HDMI_AINL4, AR33/
PC_HDMI_AINR4] of IC3301 (Digital AV decode & Main CPU) ?
NO Check the line between J501 and IC3301.
YES
Refer to “The sound is not emitted from the Spea ker & Woofer though the picture has come out.”
No sound from external input devices (4)
Does not the sound of the audio signal input to HDMI1/2/3/4 go out?
Please Refer to “[External input HDMI-1/2/3/4] No picture on the display (11)”.